Holy Proccessing.com

If you're seriously considering a DIY standing-seam roof installation, you'd best bone up on your general knowledge regarding what is undoubtedly a great roofing solution. While successful amateur installations are not unheard of, your surest bet is to seek the help of a professional. Standing-seam roofs are made of numerous interlocking panels, which run vertically from the ridge, or edge, of the roof to its apex at the eave. The seam where any two panels interlock is raised just above the surface of the roof, allowing water to run off the roof without it dripping in between the panels. This simple structure belies numerous details of installation that, if not properly attended to, can lessen the efficacy and lifespan of the roof.

That said, metal roofing panels are generally much easier to move around than traditional clay or fiber-glass shingles. Weighing in at only one to two pounds apiece, their portability makes the logistics of lugging them onto a rooftop much simpler, so your contractor's unlikely to charge you the same rates he would for a more challenging job. You can also forego the need to tear the old roofing off, as installing a standing seam roof over the old roof is no more difficult than normal installation.

This is why, if you've already got your roofing materials, that trying to do a DIY standing-seam roof installation is going to be so much more trouble than it's really worth. If this sounds like a load of codswallop to you, and you intend to forge on no matter what the challenges, then here's a couple of metal roof installation tips. First off, after everything's been covered with a protective plastic membrane to prevent unexpected water seepage from entering the house, you should put down some roofing paper. Scratch that - lots of roofing paper. In fact, it needs to fill just about every bit of roofscape you can find, including the roof valleys (these are the spaces in between roof surfaces, which often resemble gutters). On top of that you'll need to lay a ridge cap, a preformed cover that fits over the roof's peak. The edges of this will be covered by your shingle, but it rounded apex will still peak out from the shingles, giving the roof it its essential character.

Now that that's all done, you're ready to start worrying about the shingles, or roof paneling. Ask around at the construction outlet or hardware store where you first procured your shingles and find someone that can demonstrate the manner in which the shingles need to be fitted together. If you haven't bought the materials yet, you should know that there are a bunch of companies that make panel solutions that are really easy to clip into place, designed for DIY standing-seam roof installation and requiring nothing but your hands and perhaps the most rudimentary assortment of tools. Check out the website of Permanent Roofing Systems (permanentroofing.com), where you'll find a PDF full of DIY metal roof installation tips available for download and instant reference.

Now, all this is well and good until you realize that your roof isn't regularly shaped. And I'll tell you, most peoples' roofs fall into the category of irregular. Just about everyone's roof has some kinky little feature, like a skylight or a chimney or a dormer, that needs to have pre-made shingles cut in accordance with its shape. Should you attempt to use your regular shingles without consideration for the unique requirements of these areas, you're going to end up with a roof that is either ugly or practically ineffectual. The fact is, the tool for this job is not a saw or a hammer, it's a hydraulic powered shear with teeth sharper than razor blades that trained professionals use to quickly cut standing seam roofing panels to size on site. It's called a brake, and it's the reason you want a pro doing this kind of a job.

Should you attempt to do the job yourself, the most likely result will be a standing seam roof that either looks slapped together or else is easily damaged by leaking or swelling ice caught between panels. This is when the cost of DIY standing-seam roof installation can actually outstrip that of professionals - because you'll probably need to redo the entire job at some point.

If under such circumstances you persist in your DIY efforts, the odds are that patch jobs around irregular areas are either going to look bad or result in your standing-seam roof being compromised, leading to leaking and other forms of weather damage, such as the negative effects that swelling ice can cause when caught between panels. Properly installed standing-seam roofs are subject to warranties of up to fifty years, given the nigh-on invulnerable hardiness of the materials. So don't skimp now - a once-off investment could leave you with a roof that lasts a lifetime.